Diodepi PRO™ | 808nm Diode Laser Hair removal System
Diodepi PRO™ | 808nm diode laser system uses special semiconductor laser with long Pulse-Width 808nm, can penetrate to hair follicle effectively. When laser outputs, system with special cooling technology, cool the skin and protect skin from being hurt and reach a very safe and comfortable treatment.
Features
- Gold standard 808nm laser diode provides reliable result
- SHR Technology
- Intelligent 3D Contact cooling system.
- Real Sapphire Crystal built in head enable efficient cooling delivery.
- High quality laser Gun with 10,000,000 flash times
- Virtually Painless Treatment
- Faster and more efficient treatment
- Rust-proof water circle design
- Self-monitoring system: Water flow, water temperature and water level.
- Intelligent Interface Intuitive and user friendly 10.4 inch Touch Screen
Technologies
Advanced diode laser technology
- Gold standard 808nm laser diode
- SFS technology
- Microchannel cooling technology
- Energy Test Video
- Treatment Instruction Video
- Software Instruction Video
Gold standard 808nm laser diode
808nm diode laser technology is the gold standard in laser hair removal since it was introduced in 1998. Unlike earlier systems, however, diode laser energy penetrates deep into the dermis (where the hair follicle is located) with high average power and a rapid 10 pulse-per-second repetition rate.
SFS technology
SFS technology enable super fast and more efficient treatment as the repetition rate reach up to 10Hz. It allows operators quickly scanning the treatment area which greatly reduce treatment time and achieve better result.
The high average power, low fluence, high repetition rate SHR mode pulses slowly increase the temperature of the hair follicle containing the cells responsible for hair regrowth. By constantly moving the handpiece during treatment, the energy is delivered safely and more uniformly, eliminating skipped spots and ensuring patient comfort.
SFS technology combines concurrent cooling with a gradual thermal rise to the target’s critical temperature, while minimizing the risk of injury and with much less pain for the patient. It represents a breakthrough in patient comfort, speed of procedures and repeatable clinical results.
This is in contrast to the high peak power delivered by traditional IPL technology that require high cooling before, during and after each flash. The SFS technology enables continuous administration in a larger treatment area for increased comfort and fewer missed spots.
Diodepi PRO adopt Germany microchannel water cooling technology.
The cooling system offer precise and constant temperature (4℃), which can ensure painless of hair removal.
More than 10,000,000 shots ensures longer lifetime than other laser hair removal machines.
Please watch the below video regarding the energy of our diode laser hair removal machine.
Energy Test of Diodepi PRO
Here is a short video instruction of our diode lazer machine treament.
Short Instruction of Diodepi PRO Treatment
Short Instruction of Diodepi PRO Software
Design
Luxury Standard Build High Quality
- Sheet Metal Frame
- Super Size Heatsink
- Freon Compressor
- Deionized Water Device
- Micro-Channel Laser Module
- Dust-free Package
- Accurate Measurement
- User-friendly Software
- Laser Module Production Video
- Laser Packing Lab
The Diodepi PRO inside adopts sheet metal frame which guarantee the high quality.
There are also lots of diode laser hair removal machines in the market install all the parts to ABS plastic machine body without any metal frame protection which are easily broken during the long transportation.
Diodepi PRO adopts super big size of heatsink design, due to the high quality of cooling system, it makes Diodepi PRO continuously work more than 12 hours.
As far as we know, there are lots of cheap 808nm diode laser hair removal system which use fan for cooling, all of these machines need to rest after working half an hour to one hour because of cooling water get high temperature. This is really a bad laser hair removal experience for commercial use.
Freon compressor is one of the most important parts for cooling system, without compressor, the preformance of cooling will be reduced in a huge degree.
Diodepi PRO use Europen standard freon compressor which can be used at most of countries all over the world, in other words, there is no problem for the custom clearance and overseas shipment.
Meanwhile, some of the laser diode machine suppliers use cheap freon compressor which can not be approved in most of countries, it will get in trouble for custom clearance.
Diodepi PRO comes with an inside deionized water device, which makes the water clean enough for micro-channel cooling system.
Diodepi PRO adopts Micro-channel laser bar which is imported from Jenoptik in Germany.
Micro-channel semiconductor laser Micro-channel Package
The semiconductor lasers currently on the market adopt Macro-channel technology, Macro-channel Laser modules are packaged manually, what’s more, it can not guarantee the high performance of semicondouctor lasers cooling.
Due to the weak cooling performance of Macro-channel technology, it will seriously affected the laser life, what’s worse, the Macro-channel lasers can not meet the requirements of continously working, also very lower efficiency and unstable quality.
Diodepi PRO adopts the laser source with Germany micro-channel cooling technology, The cooling system offer precise and constant temperature (4℃), which can ensure painless of hair removal.
More than 10,000,000 shots ensures longer lifetime than other hair removal machines.
All the laser modules are packaged under dust-free workshop.
The power of laser module are accurate measured by precise instrument, each laser bar is 100W. Six bars in total 600W.
User Friendly Software
Laser Module Production
Welcome to Visit GBS Packaging Lab
Compare
Advantages by Comparison
- Real 600W Semiconductor
- Micro-channel Laser Module
- Software Language Customize
- Ten Million Shots Guarantee
- Suitable for All Skin Type
There are so many diode laser machines in markent marked 600W laser bar module, actually most of them use cheaper Marco-channel laser module which is nearlly 400W only. What’s more, the laser module is easy to burn out due to the poor quality of cooling system.
The power of Diodepi PRO are accurate measured by precise instrument, each laser bar is 100W. Six bars in total 600W.
Diodepi PRO adopts Micro-channel laser bar which is imported from Jenoptik in Germany.
Micro-channel laser diode module
Micro-channel semiconductor laser
The semiconductor lasers currently on the market adopt Macro-channel technology, Macro-channel Laser modules are packaged manually, what’s more, it can not guarantee the high performance of semicondouctor lasers cooling.
Due to the weak cooling performance of Macro-channel technology, it will seriously affected the laser life, what’s worse, the Macro-channel lasers can not meet the requirements of continously working, also very lower efficiency and unstable quality.
Miro-channel VS Macro-channel
Diodepi Laser support more than eight languages, Chinese, English, German, Italian, Portuguese, Russian, Spanish and Polish etc. to meet all of the clients’ requirement all over the world.
The Default languare is English, it only show one kind of language on machine.
Diodepi PRO adopts the laser source with German micro-channel cooling technology, the cooling system offer precise and constant temperature (4℃), which can ensure painless of hair removal.
More than 10,000,000 shots ensures longer lifetime than other hair removal machines.
Diode laser hair removal treatment can be used for all skin type and very effective for all skin type except skin type VI.
Application
- Permanently remove unwanted hair on all parts of the body for all six skin types.
- Skin Rejuvenation
Specification
| DioDepi PRO | |
|---|---|
| Dimensions | 390x470x930mm |
| Laser type | Diode laser |
| Wavelength | 808nm±2nm |
| Laser bar type | German Microchannel laser bar |
| Fluence | 0~120J/cm2 |
| Spot Size | 11x11mm or 10x17mm |
| Repetition rate | 1~10HZ |
| Pulse Width | 0ms~400ms |
| Laser Gun Power | 600W |
| Screen | 10.4inch Color Touch Screen |
| Protection System | Foot switch, Emergency switch |
| Power supply | AC220V±10%, 50Hz; AC110V±10%, 60Hz |
| Net weight | 60KG |
Result
Hair Removal Legs
Hair Removal Lips
Skin Rejuvenation
Product FAQ
Which Skin Type is the Diode laser suitable for?
Diode laser treatment can be used for all skin type and very effective for all skin type except skin type VI.
What are the advantages of Diode laser hair removal?
- The Diode laser features a longer wavelength and thus able to provide better results among dark-skinned people.
- This laser provides safer and deeper penetration into the skin layer.
- Large areas of the body tend to recover faster.
Is Diode laser hair removal permanent?
There is no laser that has received FDA clearance for a claim of permanent hair removal. However, the diode laser hair removal was the first to be cleared by the FDA for permanent hair reduction (which is defined by the FDA as 85% or greater hair reduction). It is possible that follicles in the treated area, while not being completely destroyed, will be sufficiently disabled to the point where they produce only fine, light hairs that do not respond to further treatment. This is backed up by extensive clinical studies and you should be wary of anyone who claims otherwise.
How does the diode laser remove hair?
This laser targets the pigment located in the hair follicle and shaft. The light is absorbed by the pigment in the hair follicle and this energy is converted to heat which results in damage to the hair follicle. This damage causes delayed re-growth of hair and, in most cases, permanent destruction of many of the hair follicles. Unlike electrolysis, which disables one hair follicle at a time, the laser reaches and treats hundreds of follicles at a time
What will I look like/how red will I be after the treatment?
Post treatment reactions vary depending on the coarseness, density and color of the hair and the area being treated. In general terms, most patients experience redness similar to a mild sunburn.
How long before I see results?
You will see some results immediately. It takes a week or two for all of the hair in the treated area to fall out. After that, you will experience several weeks of no growth in the treated area. So you are actually receiving immediate gratification while you are moving toward your long-term goal.
Can I be treated while taking medications?
The only medications that are prohibited for Laser Hair Removal are Accutane and Retin-A, which must be discontinued prior to treatment. During your consultation, we will review any medications or supplements that you are currently taking to help determine the appropriate course for your treatment.
I’m pregnant/planning on becoming pregnant. Can I still be treated?
That depends. Pregnancy restricts the use of topical anesthetics and may present some other challenges. While there is no evidence to suggest that pregnant women cannot be treated safely, it is our policy not to treat without written permission of the patient’s physician. When you come for your consultation, we can discuss the particulars of what you would like to have done and review your options.
